SnO nanoparticles were prepared by addition of HCl to tin oxide solution. The synthesis process is simplified for SnO nuclei. We herein report a better-defined and simple procedure for synthesis of SnO particles in a simple hydrothermal process.
Tin Oxide XRD SEM Nanostructure Precipitation Urea1. Introduction
Metal and metal oxide nanoparticles, differing from their bulk analogs in chemical, thermal, optical, magnetic and other properties, are widely used in catalysis, medicine, electronics and other fields. Many different methods of nanoparticle synthesis with the use of supercritical fluids (SCF) have been suggested, in particular, the reverse micelle, rapid expansion and hydrothermal synthesis methods [1] [2] and [3] . Among these methods hydrothermal process has the best advantages and possibilities for synthesis of metal and metal oxide nanoparticles [4] [5] . Metal oxide nanomaterials can completely degrade the contaminants with sunlight or UV radiation at room temperature and do not cause pollution [6] . These oxide nanomaterials include TiO2 [7] , ZnO [8] , SnO [9] [10] and [11] , and Fe2O3 [12] .
SnO is an important semiconductor material with excellent chemical and physical performances. As an effective photocatalyst, SnO nanostructures can photodegrade organic pollutants to other nontoxic small molecules. In this work, we report on the synthesis of SnO nanoparticles using a one-pot hydrothermal method.
2. Synthesis of SnO Nanoparticles
The synthesis of SnO Nano particles was carried out by conventional Hydrothermal protocol, SnCl2・2H2O and Dil. HCl was used as synthesizing material. In a typical Procedure stock solutions of 0.1 M (2.3 g) SnCl2・2H2O, solution was prepared in 50 ml of 1.0 M HCl under stirring. To this stock solution 250 ml of SnCl2 (0.1 M) solution prepared in appropriate amount of urea was added under continuous stirring in order maintain the pH of reactants as 9. The solution was transferred into Teflon lined autoclave and maintained at 150˚C for 1 hr under autogenous pressure. It was then allowed to cool naturally to room temperature. After the reaction was complete, the resulting white solid product was washed with distilled water to free the precipitates, filtered and then dried in air in a laboratory oven at 60˚C. The same was shown in flow chart Figure 1.
3. Characterization Studies3.1. XRD Study of SnO Nanoparticles
The XRD results reveal the presence of tetragonal stannous Oxide as shown in Figure 2. with orientation in (001), (101), (110), (002), (200), (112), (211), (202) and (103) planes at 18.2, 29.8, 33.2, 37.1, 44.3, 47.8, 50.7, 57.3 and 62.5 theta values corresponding to SnO and these values well matches with JCPDD No. 36-1451 data.
3.2. FT-IR Spectrum of SnO Nanopartilces
The FT-IR spectrum Figure 3 of the SnO nanoparticles, the absorption peaks at
3456 cm−1 and 1618 cm−1 are attributed mainly to the O-H stretching vibration of surface hydroxyl group or adsorbed water on the SnO nanoparticles. Peak observed at 1409 cm−1 is assigned to N-O. This may be from urea used in the experiment. The absorption band at 515 cm−1 is assigned to Sn-O vibration.
3.3. SEM Micrograph of SnO Nanoparticles
The SEM micrograph of SnO nanoparticles is shown in Figure 4. It is seen that the particles are mesoporous in nature with particle size of ~50 nm.
4. Conclusion
In the present communication, nanosized particles of SnO were successfully synthesized by hydrothermal process using tin chloride.
Acknowledgements
Authors are thankful to Management, Executive Director, Principal and Head, Department of Science and Humanities for their encouragement and grants to carry out this research work.
Cite this paper
Janardhan, E., Reddy, M.M., Reddy, P.V. and Reddy, M.J. (2018) Synthesis of SnO Nanopatricles―A Hydrothermal Approach. World Journal of Nano Science and Engineering, 8, 33-37. https://doi.org/10.4236/wjnse.2018.82002
ReferencesJung, J. and Perrut, M. (2001) Particle Design Using Supercritical Fluids: Literature and Patent Survey. Journal of Supercritical Fluids, 20, 179-219. https://doi.org/10.1016/S0896-8446(01)00064-XZhang, Y. and Erkey, C. (2006) Preparation of Supported Metallic Nanoparticles Using Supercritical Fluids: A Review. Journal of Supercritical Fluids, 38, 252-267. https://doi.org/10.1016/j.supflu.2006.03.021Reverchon, E., Adami, R. and Caputo, G. (2006) Supercritical Assisted Atomization: Performance Comparison between Laboratory and Pilot Scale. Journal of Supercritical Fluids, 37, 298-306.Adschiri, T., Hakuta, Y., Sue, K. and Arai, K. (2001) Hydrothermal Synthesis of Metal Oxide Nanoparticles at Supercritical Conditions. Journal of Nanoparticle Research, 3, 227-235. https://doi.org/10.1023/A:1017541705569Adschiri, T., Hakuta, Y. and Arai, K. (2000) Hydrothermal Synthesis of Metal Oxide Fine Particles at Supercritical Conditions. Industrial & Engineering Chemistry Research, 39, 4901-4907. https://doi.org/10.1021/ie0003279Wang, W.-S., Zhen, L., Xu, C.-Y. and Shao, W.-Z. (2009) Room Temperature Synthesis, Growth Mechanism, Photocatalytic and Photoluminescence Properties of Cadmium Molybdate Core—Shell Microspheres. Crystal Growth & Design, 9, 1558-1568.Mahlambi, M.M., Ngila, C.J. and Mamba, B.B. (2015) Recent Developments in Environmental Photocatalytic Degradation of Organic Pollutants: The Case of Titanium Dioxide Nanoparticles—A Review. Journal of Nanomaterials, 2015, Article ID: 790173.Zhang, S., Yin, Y., Gao, Y., Liu, Y., Qiu, F. and Wu, X. (2014) Modifying the Hierarchical Porosity of SBA-15 via Mild-Detemplation Followed by Secondary Treatments. Journal of Physical Chemistry, 2014, Article ID: 532317.Wang J.X. Lu, C. Liu, X.C. Wang, Y.Q. Zhu, Z.X. and Meng D.W. ,et al. (2007)Nanostructures with Novel Distribution Characteristic and Superior Photocatalytic Performance Materials & Design 115, 103-111.Wang, L., Shen, L., Zhu, L., Jin, H. and Bing, N. (2012) Preparation and Photocatalytic Properties of SnO2 Coated on Nitrogen-Doped Carbon Nanotubes. Journal of Nanomaterials, 2012, 6.Jiménez, V.M., González-Elipe, A.R., Espinós, J.P., Justo, A. and Ernández, A. (1996) Synthesis of SnO and SnO2 Nanocrystalline Powders by the Gas Phase Condensation Method. Sensors and Actuators B: Chemical, 31, 29-33.Cao, S.-W. and Zhu, Y.-J. (2008) Hierarchically Nanostructured α-Fe2O3 Hollow Spheres: Preparation, Growth Mechanism, Photocatalytic Property and Application in Water Treatment. Journal of Physical Chemistry C, 112, 6253-6257.