In this paper, we analyze the two-dimensional Boat-shaped structure based on the finite element method. We calculated its energy band structure and vibration transmission properties and found that the structure has band gaps at both high and low frequencies. Compared with common traditional two- dimensional phononic crystals, the boat-shaped phononic crystal has the advantage of larger bandgap design and modulation parameter space due to their structural complexity. In order to obtain better bandgap characteristics, we studied the influence of four key parameters, such as the rod length and the angle between the rods, on the bandgap. The results show that: for low frequency band gaps, the width of the band gap can be effectively changed by changing the size of the angle between the rods while rod length greatly affects the bandgap position; for high band gaps, the length of rods has a large effect on the band gap position. These laws have guiding significance for the bandgap regulation of boat-shaped phononic crystal.
Phononic Crystal Band Gap Boat-Shaped Finite Element Simulation1. Introduction
Phononic crystals (PCs) are periodic structure that can prohibit the propagation of acoustic or elastic waves with frequency in the range of phononic bandgap [1]. In recent years, theoretical and applied exploration of PCs has attracted extensive research interest due to the unique function of the band gap and has proposed a wealth of applications. Especially, it has a good application prospect in damping and noise reduction and elastic wave control, including but not limited to sound absorbers [2] [3], vibration isolators [4], acoustic cloaks [5] [6], filters [7], and waveguides [8]. It is generally believed that there are two mechanisms for generating band gaps in phononic crystals, namely Bragg scattering [9] and local resonance [10]. For the former, the interaction between unit cells or the periodicity of the structure leads to the appearance of the band gap; for the latter, the resonance properties of a single scatterer play a decisive role in the appearance of the band gap. Based on these two mechanisms, in order to obtain better bandgap properties, a host of academic research has been done on different periodic structures. Based on the Bragg scattering theory, Wang [11] studied the effect of a plate with cross cavities on the band gap. Wang [12] studied the effect of different inclusions in the same matrix on the band gap by the finite element method. Seongmin et al. [13] proposed a tapered phononic beam with a broad low-frequency band gap for flexural waves. Gao et al. [14] proposed and discussed the elastic wave attenuation of hollow metamaterial beam embedded acoustic black hole. M. Thota et al. [15] proposed and studied an origami phononic structure with tunable waveguiding. The boat-shaped phononic crystal we studied in this paper was proposed in a previous work of our group [16]. Compared with conventional Bragger scattering PCs and local resonance PCs, the advantage of Boat-shaped phononic crystal is the larger parameter spaces for design and modulation of bandgaps.
The structure of this paper is as follows: Firstly, we introduce the structural characteristics of Boat-shaped phononic crystal and investigate the band gap properties of this phononic crystal using the finite element method. Secondly, the parametric study was performed and the results of how parameters affect the bandgaps were discussed. Lastly, the conclusions are summarized.
2. Structure and Theoretical Basis
The structure of the Boat-shaped phononic crystal studied in this paper is shown in Figure 1(a). Due to the mirror symmetry of the structure along both the x-axis and the y-axis, the unit cell can be described by the following geometric parameters: The lengths of rods C 1 C 2 and C 3 C 4 are C 1 C 2 = 15.4 mm and C 3 C 4 = 15.7 mm respectively. θ 3 is the space angle between rod L C 1 C 2 and rod L C 3 C 4 , θ 1 is the angle between the plane where notes C 1 , C 2 and C 3 are located and the plane where notes C 2 , C 3 and C 4 are located. The values of θ 1 and θ 3 are θ 1 = 48.55˚ and θ 3 = 110.7˚ respectively; all rods have a radius R of 1 mm. The material parameters set during the numerical simulation are as follows: ρ = 1800 kg/m3, E = 0.86 GPa and ν = 0.45 represent the density, Young’s modulus and Poisson ratio, respectively.
In a linear elastic, isotropic, homogeneous medium with infinite volume, ignoring the effect of damping, the vector form of the elastic wave equation can be written as:
− ρ ω 2 u ( r ) = ( λ + μ ) ∇ ( ∇ ⋅ u ( r ) ) + μ ∇ 2 u ( r ) (1)
In Equation (1), r is the spatial position vector, u is the mass displacement vector, ρ is the density of the medium, μ and λ are the Lame constants of the material, ω denotes the characteristic circle frequency. Due to the spatial periodicity and symmetry of the phononic crystal, the eigenfrequency and eigenmode of the wave field have a certain periodicity. According to the Bloch theorem, the eigenwave field in the periodic structure can be expressed as:
u ( r ) = u k ( r ) e i ( k ⋅ r ) (2)
In Equation (2), k denotes Bloch wave vector. The translation of the amplitude function u k ( r ) to the lattice vector R is also periodic, that is:
u k ( r + R ) = u k ( r ) (3)
Due to the symmetry of the phononic crystal point group, the wave vector k can only take a value in the first irreducible Brillouin zone. Figure 1(b) shows the first Brillouin zone of Boat-shaped phononic crystal, and the shaded area denotes the irreducible Brillouin zone. Due to the function of setting periodic boundaries, all results in this paper are calculated by commercial code COMSOL. Figure 2 shows the band structure of Boat-shaped phononic crystal when all
parameters are initialized. We find that the first band gap appears in the interval (1942 Hz, 2204 Hz) and the second band gap appears in the interval (11,216 Hz, 11,640 Hz). The band gap widths for low and high frequencies are 262 Hz and 424 Hz, respectively.
3. Numerical Simulations and Results
In this section, we discuss the effect of geometric parameters θ 1 , θ 3 , L C 1 C 2 and L C 3 C 4 on the low frequency first band gap and high frequency second band gap of boat-shaped phononic crystal. Noting that other geometric dimensions and material properties remain unchanged when the single parameter changes. As parameter θ 1 increase from 30˚ to 90˚, the lower bound of band gap has a significant decline while the band gap expands, as shown in Figure 3(a). Figure 3(b) shows the effect of θ 3 on band gap, the width of the band gap is basically unchanged when θ 3 is between 70˚ - 140˚, but when θ 3 increases from 140˚ to 150˚, the band gap shrinks and closes in 150˚. As geometric parameter L C 1 C 2 increase from 11 mm to 21 mm, the lower bound and upper bound of first band gap all show a downward trend and the bandwidth widen first and then narrow, and the result is shown in Figure 3(c). Figure 3(d) shows the effect of L C 3 C 4 on band gap, when L C 3 C 4 changes from 12 mm to 20 mm, the position of the band gap decreases, and the bandwidth shows the same pattern as in Figure 3(c). By analyzing Figure 3, we can see that the bandwidth is more sensitive to θ 1 , and L C 1 C 2 has the greatest effect on the bandgap position.
After analyzing the effect of parameters on the low frequency bandgap, now we study the relationship between these four parameters ( θ 1 , θ 3 , L C 1 C 2 , L C 3 C 4 ) and the high frequency band gap, the results are shown in Figure 4. We can find
that as θ 1 , θ 3 , and L C 3 C 4 increase within their respective ranges, the corresponding band gaps first open and then close, and bandwidths first widen and then narrow, as shown in Figure 4(a), Figure 4(b) and Figure 4(d). In contrast, as shown in Figure 4(c), as parameter L C 1 C 2 increase from 14 mm to 21 mm, the position of high frequency bandgap has a significant decrease while the bandwidth keeps increasing. The maximum of bandwidth of High frequency second bandgap occurs at L C 1 C 2 = 21 mm. Within the variation interval of L C 1 C 2 , the variation of the band gap position is also the largest. These show that both the bandgap position and the bandwidth are most sensitive to the parameter L C 1 C 2 .
4. Conclusion
In summary, we used the finite element method to study the band structure of the Boat-shaped phononic crystal and found that it has elastic wave band gaps at both high and low frequencies. In the parametric study of four key design parameters, the law of the influence of parameters on the band gap was found. For low frequency band gaps, the width of the band gap can be effectively changed by changing the size of θ 1 while L C 1 C 2 and L C 3 C 4 greatly affect the bandgap position. For high band gaps, L C 1 C 2 and L C 3 C 4 have a large effect on the band gap position. These laws will inspire us to design boat-shaped phononic crystal with more excellent or specific band gaps that can be applied in specific fields.
Conflicts of Interest
The authors declare no conflicts of interest regarding the publication of this paper.
Cite this paper
Xu, J., Li, Y.B. and Kuang, Y.D. (2022) Study on Band Gap Characteristics of Boat-Shaped Phononic Crystal. Journal of Applied Mathematics and Physics, 10, 3693-3699. https://doi.org/10.4236/jamp.2022.1012247
ReferencesKushwaha, M.S., Halevi, P., Dobrzynski, L. and Djafari-Rouhani, B. (1993) Acoustic Band Structure of Periodic Elastic Composites. Physical Review Letters, 71, 2022-2025. https://doi.org/10.1103/PhysRevLett.71.2022Sanchez-Dehesa, J., Garcia-Chocano, V.M., Torrent, D., Cervera, F., Cabrera, S. and Simon, F. (2011) Noise Control by Sonic Crystal Barriers Made of Recycled Materials. The Journal of Acoustical Society of America, 129, 1173-1183. https://doi.org/10.1121/1.3531815Wen, J.H., Zhao, H.G., Lv, L.M., Yuan, B., Wang, G. and Wen, X.S. (2011) Effects of Locally Resonant Modes on Underwater Sound Absorption in Viscoelastic Materials. The Journal of the Acoustical Society of America, 130, 1201-1208. https://doi.org/10.1121/1.3621074Reynolds, M. and Daley, S. (2014) An Active Viscoelastic Metamaterial for Isolation Applications. Smart Materials and Structures, 23, Article ID: 045030. https://doi.org/10.1088/0964-1726/23/4/045030Cummer, S.A. and Schurig, D. (2007) One Path to Acoustic Cloaking. New Journal of Physics, 9, 45. https://doi.org/10.1088/1367-2630/9/3/045Zigoneanu, L., Popa, B.-I. and Cummer, S.A. (2014) Three-Dimensional Broadband Omnidirectional Acoustic Ground Cloak. Nature Materials, 13, 352-355. https://doi.org/10.1038/nmat3901Sugahara, A., Lee, H., Sakamoto, S. and Takeoka, S. (2019) Measurements of Acoustic Impedance of Porous Materials Using a Parametric Loudspeaker with Phononic Crystals and Phase-Cancellation Method. Applied Acoustics, 152, 54-62. https://doi.org/10.1016/j.apacoust.2019.03.019Taleb, F. and Darbari, S. (2019) Tunable Locally Resonant Surface-Acoustic Waveguiding Behavior by Acoustoelectric Interaction in ZnO-Based Phononic Rystal. Physical Review Applied, 11, Article ID: 024030. https://doi.org/10.1103/PhysRevApplied.11.024030Sigalas, M.M. and Economou, E.N. (1992) Elastic and Acoustic Wave Band Structure. Journal of Sound and Vibration, 158, 377-382. https://doi.org/10.1016/0022-460X(92)90059-7Liu, Z., Zhang, X., Mao, Y., et al. (2000) Locally Resonant Sonic Materials. Science. 289, 1734-1736. https://doi.org/10.1126/science.289.5485.1734Wang, Y.F., Wang, Y.S. and Su, X.X. (2011) Large Bandgaps of Two-Dimensional Phononic Crystals with Cross-Like Holes. Journal of Applied Physics, 110, Article ID: 113520. https://doi.org/10.1063/1.3665205Wang, T., Wang, H., Sheng, M.P. and Qin, Q.H. (2016) Complete Low-Frequency Bandgap in a Two-Dimensional Phononic Crystal with Spindle-Shaped Inclusions. Chinese Physics B, 25, Article ID: 046301. https://doi.org/10.1088/1674-1056/25/4/046301Park, S. and Jeon, W. (2021) Ultra-Wide Low-Frequency Band Gap in a Tapered Phononic Beam. Journal of Sound and Vibration, 499, Article ID: 115977. https://doi.org/10.1016/j.jsv.2021.115977Gao, N.S., Guo, X.Y., Cheng, B.Z., Zhang, Y.N., Wei, Z.Y. and Hou, H. (2019) Elastic Wave Modulation in Hollow Metamaterial Beam with Acoustic Black Hole. IEEE Access, 7, 124141-124146. https://doi.org/10.1109/ACCESS.2019.2938250Thota, M. and Wang, K. (2018) Tunable Waveguiding in Origami Phononic Structures. Journal of Sound and Vibration, 430, 93-100. https://doi.org/10.1016/j.jsv.2018.05.031Li, Y.B., Chen, B.X., He, L.H., Huang, S.Q. and Kuang, Y.D. (2022) Scaling Up Ultrathin Boat-Graphane with the Non-Classical Stiffness Relation to Macroscopic Metamaterials. Nanoscale, 14, 12455-12462. https://doi.org/10.1039/D2NR01689C